See Our work

 

Classic Ford Mustang Repair Images

 

1965 Ford Mustang Frame Up Restoration

This 1965 Mustang is a restoration project. This phase of the project is to replace the floor and trunk pans. When removing the floor pans we found extensive rust in the front main and sub-frame rails under the front pan. The rear wheel tubs were rusted beyond repair as were the rear frame rails that support the leaf springs. All of these areas were cut out and we began installing new metal. The frame rails have gussets on the inside to support the butt weld. All the seam welds are smoothed and are welded on both sides.

For Information Call Wilson Auto Repair

972-271-3579

Take a shop tour at 3133 Saturn Road    Garland, Texas

1965 Mustang Floor Pan Replacement

The floors and toe boards were rusted. We removed the old floor and installed a new complete floor, rear trunk floor and toe boards

 

For Information Call Wilson Auto Repair

972-271-3579

Take a shop tour at 3133 Saturn Road    Garland, Texas

1965 Mustang Firewall Fabrication

To gvie the firewall a flat look we cut out the old firewall and made a flat piece to attach so the engine compartment will have a nice clean look.

 

For Information Call Wilson Auto Repair

972-271-3579

Take a shop tour at 3133 Saturn Road    Garland, Texas

 

 

1965 Musang Frame Rail Extensions

We make our frame rails using thicker box steel. We think these rails will give this 1965 Mustang a lot of strength

For Information Call Wilson Auto Repair

972-271-3579

Take a shop tour at 3133 Saturn Road    Garland, Texas

Engine Compartment Paint and Body

The engine compartment has been through the paint and body phase as has the crate engine.